Front end shift after leveling kit install

Posted on Monday, March 6th, 2017 at 9:42 am
Salty Soul Jeep Shirt

So I installed the Teraflex 2″ front, 1.5″ rear leveling kit and when putting the front end back together I noticed a considerable difference on each side. Everything had shifted to the driver side by about 1″. I thought it may correct itself when I put tires back on and lowered but it did not. Everything is still shifted to the drivers side about 1″. I also noticed that the struts need replaced as well.

Would getting an alignment correct this or should I get an adjustable track bar?

In hindsight I wish I had bought a full lift kit because you have to take everything off anyway, oh well.

Salty Soul Jeep Shirts

Article source:

Both comments and pings are currently closed.

Comments are closed.