I replaced my clutch, throwout bearing/slave, clutch master cylinder, and line. All worked for about 2 months, then started having trouble shifting til now i can’t get it in gear at all while running. I put a LUK clutch and TO/Slave in. The master was an afterthought and i just ran to autozone and grabbed one. I am hoping that is the problem since i have bled it several times and never seem to get all the air out. I have used the vacuum and tried it manually. I even ran a hose from the bleeder to the reservoir and pumped away and still saw some air. I am dreading having to drop the tranny again. I want to try a better master first.
I am looking for recommendations for a good clutch master cylinder to put in.
What have you had good luck with?