? to the Teraflex Level kit folks

Get your Jeep Decals Today


To those who have the TF install kit with the two included sway bars I have a question.

I decided to check them out after having a few hundred miles after installed by the 4×4 center I used.

The top of the sway bar has no zerk fitting but rather a rubber boot sleeve so to speak that feels like it is a empty bladder. I assume on this unit it is just for keeping dirt and debris out and is not meant to have a zerk fitting since there is not one nor a hole for one?????

Also, the bottom of the unit where there is a zerk fitting that is on the ball joint so to speak will not accept any more grease nor ooze out the side like I am accustomed to when applying a lith grease to my mower or tractor. Any idea why this would be????

Now reason I ask this about the top end of the sway bar is that I have seen pictures of TF kits that have zerk fittings on the top????? Mine however does not.

Please feel free to chime in and I posted my pictures I took of each end to see.

Salty Soul Jeep Shirt

Article source: http://www.wranglerforum.com/f202/to-the-teraflex-level-kit-folks-2110953.html