Do you leave your jeep naked 24/7 ?

My JK is my DD and my chocolate lab goes to work with me every day, so leaving the Jeep completely naked just isn’t practical. I typically settle for leaving the front doors off and the soft-top down. That way I’m only ever 10 minutes away from getting her fully dressed if the situation calls for it and I still get to enjoy the open air ride more often than not.

One of these days I hope to have enough garage space to get a third vehicle so we can just leave the Jeep completely naked most of the year. The garage I have now is pretty tight, so tight in fact that I’m a wee bit concerned about my plans for a lift and 35’s on the new ’17. I’m going to do the install in my drive way, just in case, lol.

Article source: http://www.wranglerforum.com/f274/do-you-leave-your-jeep-naked-24-7-a-2062105.html

Aftermarket installation help in West Los Angeles?


I’m about to purchase a 17′ JKU and looking for a shop to install aftermarket seats and lock boxes. Can anyone recommend a trustworthy shop in West LA?

The seats are PRP Deegan 38:

Deegan 38Pre-RunnerFixed Back | PRP Seats

We’d also like to install underseat lockboxes at the same time, if they will fit. For example:

https://www.tuffyproducts.com/p-282-…ty-drawer.aspx
https://www.tuffyproducts.com/p-487-…ty-drawer.aspx

Thanks!

Article source: http://www.wranglerforum.com/f55/aftermarket-installation-help-in-west-los-angeles-2061401.html

Engine rattle noise


Hey all, I’ve got a noise coming from engine area I’m not too thrilled about. It’s worst on a cold start. I can’t tell where the rattle is actually coming from. My best guess is that it’s strongest coming from the oil pan area.

Makeshift stethoscope (screwdriver to ear) is a little stronger at the trans bell housing. I pulled the flywheel service cover off, at the bolts seem tight (didn’t turn wheel, limited on tools right now).

Anyone have something similar?

Cold start:

After driving 30 min:

Article source: http://www.wranglerforum.com/f210/engine-rattle-noise-2060849.html

Am I doing this right?


Just got her earlier. I’m traveling the next few weekends, I’m itching get let ‘er rip. Already ordered a new head unit. Soon I’ll probably add a tow hitch receiver and running boards.

Indianapolis, IN

Article source: http://www.wranglerforum.com/f12/am-i-doing-this-right-2060209.html

First timer in Ontario


Hey first time wrangler owner since about a month ago. 17 Sahara jku

Been lurking for a while and figured it would be a whole lot easier to join.

I have been learning quite a bit and thanks to all for the info or insight and look forward to learning more.


Sent from my SM-G935W8 using Tapatalk

Article source: http://www.wranglerforum.com/f12/first-timer-in-ontario-2059281.html

New member from MS


Good Afternoon,
My Name is David and I am from Mississippi. I have had a few Jeeps( 48cj2a, 77cj5, 85cj7, 86 Grand Wagoneer, 98xj, and currently drive an 04 Tj).
I love Jeeps and have started to pass that love on to my two children.

I look forward to visiting here more!

Article source: http://www.wranglerforum.com/f12/new-member-from-ms-2058569.html

New member from MS


Good Afternoon,
My Name is David and I am from Mississippi. I have had a few Jeeps( 48cj2a, 77cj5, 85cj7, 86 Grand Wagoneer, 98xj, and currently drive an 04 Tj).
I love Jeeps and have started to pass that love on to my two children.

I look forward to visiting here more!

Article source: http://www.wranglerforum.com/f12/new-member-from-ms-2058569.html

New Jersey ProComp Non-CV Front Drive Shaft


ProComp Non-CV style front drive shaft – NEW never installed MSRP $445 – Selling for $225.

Pick up in Bloomfield, NJ or I can deliver on RT 78 or 80 between NYC and Pine Grove, PA.

Article source: http://www.wranglerforum.com/f770/procomp-non-cv-front-drive-shaft-2057857.html

Suspension suggestions


So I’m new to the forum, been reading for a few months though. Household has a ’17 jku winter editing that’ll stay mostly stock for a while and a’ 14 jkur in need of some goodies.

I know I don’t want a BB lift, I want a 2.5″ coil lift that’s reasonably priced and can be built upon. I have a second car but will still drive the jkur primarily. I want mono tube shocks and equal parts on and off road drivablility, some rocks and Flex if I can find them in Upstate NY but thats not priority. I like the rock krawler 2.5 flex but with shocks it’s a little out of my budget at the moment. Is there anything comparable out there that’s closer to 1k instead of 2k?

Going with 1.5″ spacers for the moment, any preferred brands or vendors?

Anyone in Upstate NY have any shops they recommend for regearing? I’m comfortable installing the lift but want a shop to regear to 4.56 from 3.73 for 35s eventually.

Looking forward to the wrangler community support, coming from a wrx and nasioc I could always find answers to my questions and I know you guys are a tight knit group as well!

Regards,
Mark

Article source: http://www.wranglerforum.com/f274/suspension-suggestions-2057249.html

Stolen 10a jeep jku from dealership


I dropped my jeep off at the dealership for service and it was stolen from there lot!!! They had no clue that it was gone until I called them to let them know it was not there.

The story and full breakdown can be found here:

https://www.facebook.com/thomas.tsitouridis

https://www.instagram.com/thomasridis/

Please repost!!!

Article source: http://www.wranglerforum.com/f274/stolen-10a-jeep-jku-from-dealership-2056729.html